基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率

将微粒群算法与位错理论模型相结合，采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据，通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演，并与蚁群算法反演结果进行对比。结果表明，微粒群算法收敛速度快、稳定性高，结合经典位错理论模型，是一种可以有效求解断层三维滑动速率反演问题的优化算法，在大地测量反演领域极具应用潜力。     

地中海直布罗陀海峡附近内孤立波的地球物理特征

本文主要利用地震海洋学方法研究地中海直布罗陀海峡附近内孤立波的结构特征，此处内孤立波为第一模态下沉型，为中幅度和大幅度内孤立波，垂向振幅最大可达74.5 m，振幅随深度增加呈增大趋势，传播速度随振幅增大而增大，可以确定"真"最大振幅位置位于密跃层附近.由于类多普勒效应和孤立波与测量船之间存在夹角的原因，从地震剖面上得到的为视半高宽参数，需要进行校正后才能得到比较真实的半高宽参数，校正后半高宽最高可达到1721.8 m，但是校正后的半高宽与理论结果有些差距，这可能与内孤立波的发育稳定程度有关.随着内孤立波包不断向东运动，整体波宽变大，垂向速度变小.本文将地震海洋学方法拓展应用于地中海区域内孤立波分析，进一步证明了利用地震海洋学方法研究海水运动的可行性.     

Seismic amplitude inversion for the transversely isotropic media with vertical axis of symmetry

Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data.     

考虑填充墙影响的钢筋混凝土厂房结构地震易损性分析

采用对角斜撑模拟纵向填充墙的作用，建立考虑填充墙和不考虑填充墙厂房结构模型，采用拉丁超立方抽样技术建立考虑材料不确定性的结构分析样本，基于随机Pushover分析确定结构不同破坏状态下的统计参数。综合考虑结构材料强度及输入地震动不确定性的影响，通过非线性时程分析开展单层钢筋混凝土厂房结构易损性研究，在此基础上比较结构横、纵向易损性的差异，研究填充墙对结构易损性的影响。研究结果表明:钢筋混凝土厂房结构体系横向地震易损性显著大于纵向地震易损性；对纵向结构体系而言，加入填充墙会明显降低结构易损性，但在相同强度的地震动作用下，填充墙破坏程度比主体结构严重，这与厂房结构的实际震害特征相符。     

The Control of the Spatial and Temporal Differential Evolution of Boundary Faults on Faulted Basins

The boundary faults of faulted basins generally have segmental growth characteristics. Quantitative analysis of fault growth processes and combined models is of great significance for basin formation and evolution and hydrocarbon accumulation. Taking the Fulongquan fault depression in the southern part of the Songliao Basin as an example, using the 3D seismic data and using the fault-displacement length analysis method, the segmental growth and evolution process of the boundary fault is systematically studied, and the control effect of the spatial and temporal differential evolution of boundary faults on faulted basins is analyzed. The study shows that the segmental growth control of the boundary fault of Fulongquan fault depression forms a series of semi-mantle shoals; the sedimentary center of the Shahezi-Yingcheng fault is controlled to migrate from south to north; The slanting and thrusting activities control the height of the anticline trap; the transformation of the boundary fault property controls the evolution of the basin's tectonic pattern from the tandem semi-mantle to the faulted anticline.     

基于CUDA的地震相干体并行算法

相干体技术在地震勘探资料解释方面得到了广泛的应用,由于相干体技术处理的对象是三维地震数据体,所以算法运算时间较长。为了缩短解释周期,本文充分发挥GPU并行计算优势,对C3相干体算法进行并行化分析。从硬盘读取数据到GPU上计算相干值并写入硬盘的整个过程进行分析,剔除了冗余数据的读取,完成了C3相干体算法的并行化设计与实现。最后分别对串行算法与并行算法进行性能测试,结果表明本文设计的并行算法在保证精度的前提下达到了16倍左右的加速比,对加快地震资料解释具有重要意义。     

Normal fault growth influenced by basement fabrics: The importance of preferential nucleation from pre‐existing structures

Reactivation of pre‐existing intra‐basement structures can influence the evolution of rift basins, yet the detailed kinematic relationship between these structures and overlying rift‐related faults remains poorly understood. Understanding the kinematic as well as geometric relationship between intra‐basement structures and rift‐related fault networks is important, with the extension direction in many rifted provinces typically thought to lie normal to fault strike. We here investigate this problem using a borehole‐constrained, 3D seismic reflection dataset from the Taranaki Basin, offshore New Zealand. Excellent imaging of intra‐basement structures and a relatively weakly deformed, stratigraphically simple sedimentary cover allow us to: (a) identify a range of interaction styles between intra‐basement structures and overlying, Plio‐Pleistocene rift‐related normal faults; and (b) examine the cover fault kinematics associated with each interaction style. Some of the normal faults parallel and are physically connected to intra‐basement reflections, which are interpreted as mylonitic reverse faults formed during Mesozoic subduction and basement terrane accretion. These geometric relationships indicate pre‐existing intra‐basement structures locally controlled the position and attitude of Plio‐Pleistocene rift‐related normal faults. However, through detailed 3D kinematic analysis of selected normal faults, we show that: (a) normal faults only nucleated above intra‐basement structures that experienced late Miocene compressional reactivation, (b) despite playing an important role during subsequent rifting, intra‐basement structures have not been significantly extensionally reactivated, and (c) preferential nucleation and propagation of normal faults within late Miocene reverse faults and folds appears to be the key genetic relationship between contractionally reactivated intra‐basement structures and rift‐related normal faults. Our analysis shows that km‐scale, intra‐basement structures can control the nucleation and development of newly formed, rift‐related normal faults, most likely due to a local perturbation of the regional stress field. Because of this, simply inverting fault strike for causal extension direction may be incorrect, especially in provinces where pre‐existing, intra‐basement structures occur. We also show that a detailed kinematic analysis is key to deciphering the temporal as well as simply the spatial or geometric relationship between structures developed at multiple structural levels.     

Dynamic mechanisms controlling the topography of Longmenshan area

The Longmenshan fault, which defines the eastern edge of the Tibetan Plateau, is one of the steepest margins of the plateau with a sharp elevation drop of about 4 km over a distance less than 100 km across the Longmenshan fault. The mechanism which is responsible for controlling and maintaining the elevation difference is highly debated. Using multiple observations including seismic velocity model, Moho depth, effective elastic thickness of the lithosphere, we conducted a quantitative study for elucidating the contributions from crust and lithospheric mantle by an integrated analysis of lithospheric isostasy and flexure. It is shown that the topography of the Longmenshan fault is supported by both lithospheric isostasy and flexure statically, and lower crustal channel flow and mantle convection dynamically. Different mechanisms have different weights for contribution to the topography of the Songpan-Ganzi block and the Sichuan Basin. The static and dynamic support contribute roughly the same to the topographic difference of ~4 km between the two sides of the Longmenshan fault. The static topographic difference of ~2 km is mainly resulted from the lithospheric isostasy, while the dynamic one of ~2 km is contributed by the uprising of the accumulated material in the lower crust beneath the Songpan-Ganzi block and the downward drag force caused by the upper mantle convection under the Sichuan Basin. It is thus suggested that the lower crustal flow and upper mantle convection are dynamic forces which should be taken into account in the studies on the dynamics in the Longmenshan and surrounding regions.     

浅层地震剖面揭示固原市清水河东侧断裂特征

为查明清水河东侧断裂的产状、性质及其浅部构造特征，跨断裂开展高分辨率的浅层地震探测，获得高信噪比的浅层地震反射叠加剖面。根据浅层地震剖面结果并结合该区域地质资料，对该断裂的浅部构造特征进行分析和讨论。结果表明，清水河东侧断裂为一条走向近SN、倾向E的逆断层，其浅部为由2~3条断层组成的“Y”字形构造，并错断埋深约10~30 m的第四系沉积层，属第四纪以来的隐伏活动断裂。     

基于MINA框架的应急救助与地震灾情管理平台设计与实现

针对不同用户群体应急救助和地震灾情需求，基于MINA框架，运用阿里云基础架构、微信组件和应用程序接口等技术方法，设计并构建集灾情信息收集与报送、应急救助服务、科普宣教等功能于一体的管理平台。该平台的设计与实现不仅有利于震后现场应急队员收集并准确报送实时灾情信息，还可为被救助人员提供防震减灾知识和地震应急避难场所空间分布等应急救助信息，实现了应急救助与地震灾情的综合管理，提升了震后应急救助、应急指挥和辅助决策等方面的服务能力。